Skip to main content

quality control for high-quality small parts

Many companies advertise with 100% tested goods or supposedly top quality. However, as an "upgrade partner" we know about the requirements of our customers, the quality fluctuations of the parts manufacturers and the consequences of an untested product. With our strict but precise finishing steps, Sealtech produces your optimal product!

An ounce of prevention is worth a pound of cure

If a C-part, e.g. an O-ring, fails due to surface damage (scratches, holes in the sealing surface, foreign body inclusion, etc.) or a material defect (e.g. mixture that is too soft or too hard), the cost of the replacement part is usually grossly disproportionate to the amount of work required to repair it; in addition, there are the costs of any downtime in work/production for the affected component and the damage to the customer's reputation.

We at Sealtech are therefore convinced that professional quality testing of seals - regardless of the price of an individual seal - is always worthwhile; the usually manageable additional costs of comprehensive quality assurance are usually more than compensated for by the increased reliability of the end product.

This is what you can expect from our quality control:

  • 1

    No part is forgotten or left out – Sealtech controls 100%.

    The first step is an optical inspection. If anything unusual is found, the parts are analyzed more closely using 2D and 3D microscopy. The component can then be precisely measured and checked for compliance with manufacturer or customer standards.
  • 2

    Elastomer parts can be measured for material defects such as Shore hardness (IRHD)

    If the measured values are outside the tolerances, the manufacturer can be held responsible.
  • 3

    Cleanroom products according to ISO-8 and ISO-5 standards

    Using residual dirt analysis, it is possible to determine how many particles are still on the product after processing/cleaning in the clean room. If necessary, rework can be carried out and - on request - measurement reports for each delivery batch can be made available to the customer.

Quality you can trust

Quality control you can trust!

Do you want security and someone who looks very closely?
Do not hesitate to contact us!

Home Semiconductor Pharma Medical Aerospace Defence